XML Template for co.it domains

XML Template - Updating your nameservers

<?xml version="1.0" encoding="UTF-8"?>
    <request
        xmlns:domain="http://www.eurodns.com/domain"
        xmlns:nameserver="http://www.eurodns.com/nameserver"
        xmlns:nameserverprofile="http://www.eurodns.com/nameserverprofile"
        xmlns:zoneprofile="http://www.eurodns.com/zoneprofile">

        <domain:update>
            <domain:name>#DOMAIN.TLD#</domain:name>
            <domain:folderid>#DOMAIN FOLDERID#</domain:folderid>
            <nameserverprofile:id>#NAMESERVER PROFILEID#</nameserverprofile:id>
            <zoneprofile:id>#ZONE PROFILEID#</zoneprofile:id>
        </domain:update>

        <nameserver:update>
            <nameserver:priority>#PRIORITY#</nameserver:priority>
            <nameserver:fqdn>#FULLY QUALIFIED DOMAIN NAME#</nameserver:fqdn>
            <nameserver:ipaddr>#IP ADDRESS#</nameserver:ipaddr>
        </nameserver:update>

        <extension:create>
            <extension:service>
                <service:domainprivacy>#WHOIS PRIVACY#</service:domainprivacy>
            </extension:service>

            <extension:data tld="co.it">
                <extension:registry>
                    <registry:a_itprovince>#A_ITPROVINCE#</registry:a_itprovince>
                    <registry:entitytype>#ENTITYTYPE#</registry:entitytype>
                    <registry:nationality>#NATIONALITY#</registry:nationality>
                    <registry:o_itprovince>#O_ITPROVINCE#</registry:o_itprovince>
                    <registry:regcode>#REGCODE#</registry:regcode>
                    <registry:t_itprovince>#T_ITPROVINCE#</registry:t_itprovince>
                </extension:registry>
            </extension:data>
        </extension:create>
    </request>

<domain:update> (Occurrences: 1)

R	#DOMAIN.TLD#	Domain to be registered
O	#DOMAIN FOLDERID#	ID of the folder to put the domain into
O	#NAMESERVER PROFILEID#	Use a nameserver profile instead of specifying the nameserver details
O	#ZONE PROFILEID#	Set a zone profile to be applied on domain

<nameserver:update> (Occurrences: 2-6)

Note: Repeat this section to specify multiple nameservers. Optional if nameserverprofile:id is provided

R	#PRIORITY#	Priority of the nameserver (1-5)
R	#FULLY QUALIFIED DOMAIN NAME#	Fully qualified domain name of the nameserve
R	#IP ADDRESS#	IPv4 address of the nameserver

<extension:service> (Occurrences: 0,1)

R

#WHOIS PRIVACY#

Activate / Deactivate whois privacy on domain (Yes/No)

XML Template - Updating one or more contacts

<?xml version="1.0" encoding="UTF-8"?>
    <request
        xmlns:domain="http://www.eurodns.com/domain"
        xmlns:contact="http://www.eurodns.com/contact">

        <domain:update>
            <domain:name>#DOMAIN.TLD#</domain:name>
            <domain:folderid>#DOMAIN FOLDERID#</domain:folderid>
        </domain:update>

        <contact:update>
            <contact:type>#TYPE#</contact:type>
            <contact:contactprofileid>#CONTACT PROFILE ID#</contact:contactprofileid>
            <contact:firstname>#FIRSTNAME#</contact:firstname>
            <contact:lastname>#LASTNAME#</contact:lastname>
            <contact:company>#COMPANY#</contact:company>
            <contact:address1>#ADDRESS LINE 1#</contact:address1>
            <contact:address2>#ADDRESS LINE 2#</contact:address2>
            <contact:address3>#ADDRESS LINE 3#</contact:address3>
            <contact:city>#CITY#</contact:city>
            <contact:zipcode>#ZIP/POSTAL CODE#</contact:zipcode>
            <contact:country_code>#COUNTRY CODE#</contact:country_code>
            <contact:email>#EMAIL ADDRESS#</contact:email>
            <contact:phone>#PHONE NUMBER#</contact:phone>
            <contact:fax>#FAX NUMBER#</contact:fax>
        </contact:update>

        <extension:create>
            <extension:service>
                <service:domainprivacy>#WHOIS PRIVACY#</service:domainprivacy>
            </extension:service>
        </extension:create>
    </request>

<domain:update> (Occurrences: 1)

R	#DOMAIN.TLD#	Domain to be updated
O	#DOMAIN FOLDERID#	ID of the folder to put the domain into

<contact:update> (Occurrences: 4)

Note: Repeat this section with a different #TYPE# for each contact to update.

R	#TYPE#	admin, billing, tech, org
O	#CONTACT PROFILE ID#	Use a contact profile instead of specifying the contact details
R	#FIRSTNAME#	Firstname
R	#LASTNAME#	Lastname
O	#COMPANY#	Company
R	#ADDRESS LINE 1#	Address, Line 1
O	#ADDRESS LINE 2#	Address, Line 2
O	#ADDRESS LINE 3#	Address, Line 3
R	#CITY#	City
R	#ZIP/POSTAL CODE#	ZIP/Postal code
R	#COUNTRY CODE#	Country code (ISO 3166-1-alpha-2)
R	#EMAIL ADDRESS#	Email address
R	#PHONE NUMBER#	Phone number format: +999999999. Starting with +country phone code
O	#FAX NUMBER#	Phone number format: +999999999. Starting with +country phone code

<extension:service> (Occurrences: 0,1)

R

#WHOIS PRIVACY#

Activate / Deactivate whois privacy on domain (Yes/No)

XML Template - Updating a domain's DNSSEC Keys

<?xml version="1.0" encoding="UTF-8"?>
    <request
        xmlns:domain="http://www.eurodns.com/domain"
        xmlns:extension="http://www.eurodns.com/nameserver"
        xmlns:secdns="http://www.eurodns.com/nameserver">
        <domain:update>
            <domain:name>#DOMAIN.TLD#</domain:name>
            <domain:folderid>#DOMAIN FOLDERID#</domain:folderid>
        </domain:update>
        <extension:create>
            <extension:secdns>
                <secdns:keydata>
                    <secdns:flag>#FLAG#</secdns:flag>
                    <secdns:protocol>#PROTOCOL#</secdns:protocol>
                    <secdns:algorithm>#ALGORITHM#</secdns:algorithm>
                    <secdns:publickey>#PUBLIC KEY#</secdns:publickey>
                </secdns:keydata>
            </extension:secdns>
        </extension:create>
    </request>

R	#DOMAIN.TLD#	Domain to be updated
O	#DOMAIN FOLDERID#	ID of the folder to put the domain into

<extension:create> (Occurrences: 0,1)

<extension:secdns> (Occurrences: 0,1)

<extension:keydata> (Occurrences: 0,5)

Note: Omit <extension:secdns> to keep any existing DNSSEC Keys .
Provide <extension:secdns> wihtout any <secdns:keydata> (i.e. empty list) to delete any existing DNSSEC Keys (see examples below) .

R	#FLAG#	DNSKEY Flags Field (DNSKEY Flags list)
R	#PROTOCOL#	DNSKEY Protocol Field (DNSKEY Protocol list)
R	#ALGORITHM#	DNSKEY Algorithm Field (DNSKEY Algorithm list)
R	#PUBLIC KEY#	DNSKEY Public Key Field. Base64 encoding of the Public Key

<extension:create>

R	#A_ITPROVINCE#	Admin Province code (if italian)
R	#ENTITYTYPE#	Entity type
R	#NATIONALITY#	World Intellectual Property Organization
R	#O_ITPROVINCE#	Owner Province code (if italian)
R	#REGCODE#	Organisation's contact registration code Organisation's contact registration code Organisation's contact registration code Organisation's contact registration code Organisation's contact registration code
R	#T_ITPROVINCE#	Tech Province code (if italian)

XML Example 1 - Update the nameservers and the administrative contact

<?xml version="1.0" encoding="UTF-8"?>
    <request
        xmlns:domain="http://www.eurodns.com/domain"
        xmlns:nameserver="http://www.eurodns.com/nameserver"
        xmlns:contact="http://www.eurodns.com/contact">

        <domain:update>
            <domain:name>eurodns.com</domain:name>
        </domain:update>

        <nameserver:update>
            <nameserver:priority>0</nameserver:priority>
            <nameserver:fqdn>ns1.eurodns.com</nameserver:fqdn>
            <nameserver:ipaddr>80.92.65.2</nameserver:ipaddr>
        </nameserver:update>

        <nameserver:update>
            <nameserver:priority>1</nameserver:priority>
            <nameserver:fqdn>ns2.eurodns.com</nameserver:fqdn>
            <nameserver:ipaddr>80.92.89.242</nameserver:ipaddr>
        </nameserver:update>

        <nameserver:update>
            <nameserver:priority>2</nameserver:priority>
            <nameserver:fqdn>ns3.eurodns.com</nameserver:fqdn>
            <nameserver:ipaddr>80.92.95.42</nameserver:ipaddr>
        </nameserver:update>

        <nameserver:update>
            <nameserver:priority>3</nameserver:priority>
            <nameserver:fqdn>ns4.eurodns.com</nameserver:fqdn>
            <nameserver:ipaddr>192.174.68.100</nameserver:ipaddr>
        </nameserver:update>

        <contact:update>
            <contact:type>admin</contact:type>
            <contact:firstname>Arthur</contact:firstname>
            <contact:lastname>Smith</contact:lastname>
            <contact:company>EuroDNS S.A.</contact:company>
            <contact:address1>24, rue Leon Laval</contact:address1>
            <contact:address2/>
            <contact:address3/>
            <contact:city>Leudelange</contact:city>
            <contact:zipcode>3372</contact:zipcode>
            <contact:country_code>LU</contact:country_code>
            <contact:email>support@eurodns.com</contact:email>
            <contact:phone>+352 123456</contact:phone>
            <contact:fax>+352 654321</contact:fax>
        </contact:update>
    </request>

XML Example 2 - Update the administrative contact by using a profile

<?xml version="1.0" encoding="UTF-8"?>
    <request
        xmlns:domain="http://www.eurodns.com/domain"
        xmlns:contact="http://www.eurodns.com/contact">
        <domain:update>
            <domain:name>eurodns.com</domain:name>
        </domain:update>
        <contact:update>
            <contact:type>admin</contact:type>
            <contact:contactprofileid>123456</contact:contactprofileid>
        </contact:update>
    </request>

XML Example 3 - Delete a domain's DNSSEC Keys

<?xml version="1.0" encoding="UTF-8"?>
    <request
        xmlns:domain="http://www.eurodns.com/domain"
        xmlns:extension="http://www.eurodns.com/nameserver">
        <domain:update>
            <domain:name>eurodns.com</domain:name>
        </domain:update>
        <extension:create>
            <extension:secdns />
        </extension:create>
    </request>

If your request has been successfully submitted, the following code will be returned:

<?xml version="1.0" encoding="UTF-8"?>
    <response xmlns="http://www.eurodns.com/">
        <result code="1001">
            <msg>Command completed successfully, action pending</msg>
        </result>
    </response>

Legend

O	The element is optional and does not have to be specified in the request and/or answer
R	The element is mandatory and has to specified in the request and/or answer